THIS DESIGN IS MADE TO ORDER. THERE IS A 1-3 WEEK BUILD TIME FROM DATE OF ORDER BEFORE ITEM WILL SHIP!
This 7.5"x11" cutting board is perfect for a small bartop. It is made with black walnut and hard maple edge grain. There is a food-safe epoxy inlay with blue pigment in the top-left corner, and non-slip rubber feet on the bottom.
Finished with 100% foodsafe mineral oil and Walrus Oil brand Cutting Board Oil and Wood Wax.
All cutting boards include a small bottle of mineral oil, care instructions, and a sticker.
7.5x11" Bar Board - Walnut and Maple
Properly cared-for cutting boards can last decades - luckily, care is simple!
Clean board promptly after use with warm water and mild dish soap. Always rinse both sides of the board when washing to help prevent splitting. Pat dry with clean towel and allow to air-dry thoroughly. NEVER wash cutting board in dishwasher.
CONDITIONING / REFRESHING (depending on use)
Every 2-6 weeks: (1) While the board is dry, wipe on a light coat of mineral oil or Walrus Oil brand cutting board oil. Allow to soak in for at least fifteen minutes, and buff dry. (2) Rub in a small amount of Walrus Oil brand Wood Wax or other beeswax-based butcher block conditioner. Allow to soak in for 15 minutes, and buff dry.
Every 3-12 months: sand, by hand or with a sander, with 180-220 grit sandpaper. Clean thoroughly with a rag lightly dampened with water or 91% isopropyl rubbing alcohol. Once the board has completely dried, follow steps (1) and (2) above.
ALLERGIES: While allergic reactions to the hardwoods used in these cutting boards are extremely rare, they are possible. If you are allergic to walnuts or tree nuts, you should ask your physician or allergist before using cooking tools containing walnut hardwood.
BACTERIA: All cooking surfaces will build up bacteria if not properly cleaned. This is the same for all cutting boards - plastic, bamboo, and hardwood. Following the below care instructions will help prevent bacterial buildup on your hardwood cutting boards.